456DUO
Dual Balance Charger/Discharger/DC Power
- 29 -
Calibration
Select
SYSTEM MENU
→
Charger Setup
→
Calibration
to enter the setup interface.
User Calibration
may result in large data
deviation, affecting normal use; so
User Calibration
is not suggested.
If the user select
User Calibration
, the
User Calibration
option changes to active status
If the user selects
User Calibration
, the corresponding message will appear in the interface after booting the charger, as
shown in the up picture above.
Select
CH-1/2 Channel Calibration
to enter the channel calibration interface, Select
Other Variables Calibration
to enter
the other variable calibration.
Channel Calibration Output Current Calibration
Other Variables Calibration
