23
Stopping the product
1. Set the power switch on the front to center
('OFF') to stop the product.
◆ While ice making is underway, the operation stops, and the motor is run
for an additional 60 seconds.
This is for protecting the motor by removing any ice or water from the cylinder.
◆ If draining was going on, the product stops after draining is complete.
(If "OFF" is selected before 60 seconds after selecting "DRAIN" during ice making,
the motor will run for the remaining time before stopping the product.)
NO
WATER
ICE
OFF DRAIN
TEMP
ERROR
MOTOR
ERROR
