background image

11

SPECIFICATIONS:

 Model:   87

 Electrical power:   

 

 115VAC ~ 60Hz or 230V AC~50Hz

  

 

Ice-making /-harvest rated current:   1.8A/1.5A (115V)

 Refrigerant:   

 

 

 

R134a, 2.47 oz.(70g)

 

High/Low side pressure:     

 

380 psig(2.6MPa)/130 psig(0.  MPa)

 

Width x depth x height(mm):  

   

 

14”(356) x 16 1/2”(420) x 24 1/2”(622)**

 

Unit weight:   

 

 

 

51 lbs (23    G)

 

Maximum ice storage:     

 

11 lbs (4.      G)

 

Ice-making capacity:   

 

 

21 lbs           G  /day*

 

Ice shape:   

 

 

 crescent

 

Ice cube dimensions(mm):  

 

 

 

1/2"(12)x3/4"(20)x2-1/2"(60) 

The technical data and performance index listed above should be used

(12mm)

*The actual quantity of ice produced per day can vary with room and

SPECIFICATIONS

Model 87 with flange:

16 1/2"

(420 mm)

14 1/2"

(368 mm)

24 1/2" with feet

(622 mm)

24" without feet

(610 mm)

15 1/2"

(393 mm)

25 7/16"

(646 mm)

14"

(356 mm)

K

 9 K

 (9.5 K   )

for reference only. They are subject to change.

water conditions.

TECHNICAL INFORMATION

1.0A/0.75A (230V)

 9

**The height include 1/2”              rubber feet.

Summary of Contents for 87













Reviews: