www.ICELED.co.uk
ZAP+
+
+
+ GUIDE v1
5
Static colour
This mode displays a single, fixed, colour. Colour can also mean lighter or darker
shades of a particular hue. The static colour can be adjusted to virtually any colour
imaginable using the two buttons:
Phasing colour
This mode automatically sweeps the colour through one of four possible ranges. The
sweep speed is adjusted using the two buttons:
By default the colours will sweep continuously through the entire rainbow but it is
also possible to restrict the colours to three smaller ranges:
Sweep speed
Press and
hold
either button to change the speed of the colour sweep. Blue slows it down,
red speeds it up. Note that the flash pattern of the mode LED changes when either the
maximum or minimum speed are reached.
+
Sweep range
Press and
hold
both
buttons
to change the range of the colour sweep. All connected light-
sources will step through the available ranges indicated by the following four colours:
Magenta (blue to red)
Yellow (red to green)
Cyan (green to blue)
White (entire rainbow)
When the buttons
are released the
sweep will
resume within the
chosen range
Hue shift
Press and
hold
either button to change the
hue of the colour. While pressing either
button pure (saturated) colours are always
produced so the effect is similar to choosing
one of the colours from the rainbow.
The adjustment will continue to loop
seamlessly through the rainbow in either
direction.
+ Other shades
Once the required hue has been set, to
obtain de-saturated or whiter shades, press
and
hold
both
buttons
together.
The first time they are pressed increasing
amounts of white will be added to the colour
while the buttons are held down.
If both buttons are released and pressed
together again white will be subtracted from
the colour providing darker shades instead.