11
Location
Installation
Unobstructed ventilation shall be maintained around the appliance at all
times.
•
The position you select for the refrigerator installation should be well-
ventilated.
•
Do not locate the refrigerator near a heat source such as cooker, and
avoid direct sunlight, thus guaranteeing the refrigeration effect while
saving energy consumption.
•
Do not locate the refrigerator in the damp place, so as to prevent the
refrigerator from rusting and lea
kage of
electricity.
•
The result of the total space of the room in which the refrigerator is
installed being divided by the refrigerant charge amount of the
refrigerator shall not be less than 1m³(space)/8g(refrigerant).
Note:
The amount of refrigerant charged for the refrigerator can be found
on the nameplate.
•
Install this appliance in a location where the ambient temperature
corresponds to the climate class indicated on the rating plate of the
appliance.
•
Select a location with enough space for the refrigerator door to open
easily.
•
Place the refrigerator on the solid and flat ground (floor) to keep it stable,
or else, it will give rise to vibration and noise.
•
When the refrigerator is placed on such flooring materials as carpet,
straw mat, polyvinyl chloride,solid backing plates should be applied
underneath the refrigerator, so as to prevent color change due to heat
dissipation.
•
When selecting a position for your appliance you should make sure the
floor/surface that it is standing on is flat and firm, do not stand on carpets
or any surface that may block ventilation.
•
Allow clearance to the right, left, back and top when installing. This will
help reduce power consumption and keep your energy bills lower.
•
This refrigerating appliance is not intended to be used as a built-in
appliance.
