4.6. Reversing the Door
The door opening can be reversed from “right hand hinged” to “left hand hinged” if
required. If your appliance is supplied “left hand hinged” simply reverse the
following procedure.
Warning!
When reversing the door, the appliance must not be connected to the mains.
Remove the plug from the mains beforehand.
-
Remove the rear retaining screws & lift off the Top Cover.
-
Remove the screws and upper hinge assembly then lift the door
away from the lower hinge assembly.
-
Remove the screws, lower hinge and foot assembly. Now remove the
hinge pin from the lower hinge, turn the hinge over and refit the pin
into the same hole.
-
Remove the left foot and refit on the right-hand side.
-
Now fit the lower hinge and foot assembly to the left-hand side.
Tighten the screws.
-
Now place the door onto the lower hinge and then refit the upper hinge
into the pre-drilled holes on the left-hand side of the cabinet. Tighten
the screws.
-
Ensure the door is correctly aligned and sealing correctly. If the door
requires further alignment, slacken off the screws, re-align the door
then tighten the screws.
-
To reverse the freezer door, unscrew the bottom hinge and remove the
door. Move the closure plate from left to right, move hinge hole cover from
left to right, rotate fzr door and place into position. Secure bottom hinge &
ensure door closes and seal correctly.
14
Top
Cover
Upper Hinge Assembly
Left Foot
Lower Hinge and Foot Assembly
Summary of Contents for RK104WE
Page 20: ...E03 A...
