5
Section 1. Installation
-
IMPORTANT!
This appliance must be left to stand in an upright position for
at least 4 hours before being switched on for the first time.
-
Remove all packaging and securing tape from the appliance.
-
Wash the interior of the appliance with luke warm water containing a small
amount of bicarbonate soda (5ml to 0.5 litres of water).
-
Position the appliance in a dry atmosphere and out of direct sunlight.
-
Please ensure that there is a small ‘air-gap’ between the condenser on the
rear of the appliance and the rear wall.
-
Do not place or store heavy items on the top of this appliance.
-
Ensure that the appliance is positioned on a firm flat floor.
-
This appliance must be level. Adjust the level by screwing the adjustable feet
up or down (use your fingers or a suitable spanner).
-
Ensure that the appliance is upright and both feet are in firm contact with the
floor so that the cabinet is stable.
-
Connect the plug to an adjacent 13amp socket outlet and ensure that the
appliance is not standing on the supply cable.
The following diagrams are shown as a guide for installation:
