4.6.
Reversing the doors
The door opening can be reversed from “right hand hinged” to “left
hand
hinged” if required.
Warning! When reversing the door, the appliance must not be connected to the mains.
Remove the plug from the mains beforehand.
-
-
-
-
-
-
-
-
-
-
Remove Plastic cap from top hinge assembly.
Remove the screws and upper-hinge assembly then lift and remove the fridge
door away from the middle hinge assembly. Now remove the hinge pin from
the upper hinge, turn the hinge over and refit the pin into the same hole.
Remove the screws and middle hinge assembly then lift the freezer door
away from the lower hinge assembly.
Remove the screws, lower hinge and foot assembly. Now remove the hinge
pin from the lower hinge, turn the hinge over and refit the pin into the same
hole. Remove the left foot and refit on the right-hand side.
Now fit the lower hinge and foot assembly to the left-hand side. Tighten the
screws.
Place the freezer door onto the lower hinge and then refit the middle hinge into
the pre-drilled holes on the left-hand side of the cabinet. Tighten the screws.
Now place the fridge door onto the middle hinge and then refit the upper hinge
into the pre-drilled holes on the left-hand side of the cabinet. Tighten the screws.
Ensure that both doors are correctly aligned and that they seal correctly. If the
doors require further alignment, slacken off the screws, re-align the doors then
tighten the screws.
Refit the plastic cap.
12
