Rear spacers
The rear of your new appliance will have either an exposed condenser (Fig.1) or
a concealed
condenser, or a ‘flat back’ (Fig.2)
Your appliance may come supplied with spacers fitted to the rear or you may be
supplied with two plastic spacers similar to those shown in Fig.3a or 3b. Fit these to
the rear of the appliance as shown (Fig.3a & 3b). When fitted, the spacers will
ensure an air gap between the condenser and the rear wall.
If your appliance does not come supplied with spacers fitted or you are not supplied
with plastic spacers to fit yourself, ensure a gap of 50mm is maintained behind
condenser and the rear wall.
Fig.1
Fig.2
Fig.3a
Fig.3b
8
