background image

4.6. What to do if something goes wrong 

There is no power to the appliance: 

-

Check there is not a power cut

-

Check there is power to the electric socket/appliance

-

Check  the  fuse  in  the  plug  (Must  be  13?@J

The compressor runs continuously:

-

Is the door closed correctly?

-

Have large quantities of food recently been added to the appliance? – if
yes, allow the interior temperature to recover

-

Has the appliance door been opened frequently? – if yes, allow the interior
temperature to recover

-

Is the t/stat control set to maximum? – if yes, adjust the control to a lower
setting

There is excessive frost/ice build-up: 

-

Ensure that the door has been closed correctly

-

Ensure that the door seal is clean and sealing correctly

-

Ensure the temperature control is not set on Max

The appliance is making a noise:

-

Refer to Normal Operating Sounds, section 3.4.

-

Ensure that the appliance has been installed correctly (see section 1).

YOUR GUARANTEE IS VALID ONLY IN THE UK. 

To Register your Appliance simply complete the card in your appliance pack and return it with 

a stamp affixed or 

Alternatively

 you can Register online at www.repairtechuk.com 

SERVICE HELP-LINE 

Should your appliance develop a fault, please call the 

Repairtech Service Helpline on: 

01527-888133 

Please remember to have all your product details available, including the model number, 

serial number, date of purchase and your retailer’s details before registering a fault. 

Your service call cannot progress without this information. 

DOMESTIC APPLIANCE DISTRIBUTORS; 

HENRY JOHN HOUSE 

NORTHWAY LANE 

ASHCHURCH

TEWKESBURY

GLOUCESTERSHIRE

GL20 8JH 

15

Summary of Contents for IK2022WE





















Reviews: