4
INSTALLATION
HOW TO USE THE REFRIGERATOR
BEFORE INITIAL USE
● Place the refrigerator on a dry, sheltered, flat surface and away from any edges. The refrigerator must
not be used unsheltered, in the open air or exposed to splashing or rain.
● Your refrigerator requires good ventilation, especially around the back of the refrigerator, allow a gap
of at least 15 cm around the sides, back and top. Never use your refrigerator in the boot of a car or
against.
● Do not install the refrigerator near heat sources, sunlight.
● Should you need to leave the device under the sun for long periods, e.g. in a car or in other vehicles,
make sure you protect it, prevent the cover plastic materials from getting damaged or warped.
● To fix it inside the car and to avoid damages during transport, we suggest to secure the fridge trough
metal brackets placed on the sides.
● Connect the feeding cable to a direct current 12 or 24 V DC power source.
● Make sure the polarity is right.
● The supply line is protected by a 15 A fuse located on the box.
● If connected to an existing cigarette plug, please carefully check up that power supply is sufficient.
● If the supplied power cable is not used, please see the table containing the information related to the
cable section:
Using the refrigerator at home (AC):
● Please connect the 12V/24V DC Power Cable with the refrigerator.
● Then connect 12V/24V DC Power Cable and Adapter Power Cable with Adapter.
● Finally inserting Adapter Power Cable into the power socket.
The Fridge/Freezer is designed to operate on DC voltage inputs.
DC input
12V or 24V
DC cable
3.5m,16AWG
