Filling Your Cooler
Before filling your IcyBreeze cooler, make sure
the drain plug is properly fitted to the drain
tube. Next, fill the unit with approximately 2 1/2
quarts of cold tap water or until the water level
covers the “Minimum Water Level” line clearly
marked inside the unit. Adding hot water will
reduce cooling performance. This will ensure
optimum operation.
Fill the IcyBreeze with the desired amount of
ice.
Do not use dry ice. This can cause serious
health risks and even death
. Be sure not to
overfill the cooler; the lid should close with-
out impacting any ice. The unit holds up to 30
pounds of ice.
Using Your Portable
Air Conditioner
By this step, your IcyBreeze should have power,
water, and ice. Turn the switch to one of the
three fan positions to start your IcyBreeze. It
takes the pump about 20 seconds to run water
through the cooling system. Once the ice begins
cooling the water, you should begin to feel cool
air. The air of the IcyBreeze comes out through
the vent or you may also pull the flexible vent
tube to direct the airflow.
Minimum Water
Level Line
3 Speed Fan Switch
Installation & Setup
4
