background image

 

SAFETY/ WARNING 

 
 
Please pay close attention to the safety notices in this section. Disregarding these 
notices may lead to serious injury and/ or damage to the unit. 
 
 

ATTENTION 

 

1.

 

 To minimize shock and fire hazards, be sure not to overload outlet. Please 
designate one outlet for your unit. 

2.

 

Do not use extension cords. 

3.

 

Do not put your hands under the unit when the unit is required to be moved. 

4.

 

When the unit is not in use for a long period of time, please unplug the unit 
from the outlet. 

5.

 

After unplugging the unit, wait at least 10 minutes before re – plugging it. 
Failure to do so could cause damage to the compressor. 

 

UNPLUG CORD  

 

1.

 

To minimize shock and fire hazards, please do not plug or unplug the cord 
with wet hands. 

2.

 

During maintenance and cleaning, please unplug the unit. 

 

PROPER GROUNDING REQUIRED 

 

1.

 

To minimize shock and fire hazards, make sure that the unit is properly 
grounded. 

 

PROHIBITED 

 

1.

 

Do not attempt to remove or repair any component unless instructed by factory. 

2.

 

Make sure that the unit is not resting on or against the electrical cord and plug. 

3.

 

To minimize personal injury, do not hang on the doors. 

4.

 

Do not store any flammable and explosive gas or liquids inside the unit. 

5.

 

Do not attempt to alter or tamper with the electrical cord. 

6.

 

Do not set the desired temperature out of the recommended temperature range. 

7.

 

Do not store corrosive or high acidity items or food in the unit. 

 
  
 
 
 
 

Summary of Contents for LSZ Series








Reviews: