Directions for the grinding and crystallization processes
ICE I
P
17 I
P
18HD
7
OPERATOR
Grinding process
Prepare the following tools and items:grinding disc holder, grinding disc(usually the granularity is
300#. 500#.2000#), window squeegee, wet vacuum cleaner, “caution wet fl oor” caution signage.
Turn on the machine, put clean water on the fl oor. Grind slowly and evenly. Remove the water
on the stone surface using a window squeegee. Repeat the procedure as required until there
are no marks on the fl oor.
Attach the base grinding disc to the grinding disc holder (fi rst use the grinding disc with smallest
granularity (the smaller the granularity number, the coarser the disc)) and then fit it onto the
machine. Fill the tank with water.
Prepare the following tools and items:pad driver. fiber pad (steel pad), dust mop, K2 stone
treatment, or K3 stoneshining plasm, or crystallization powder.Fit the pad driver onto the
machine,then attach the fi ber pad (steel pad).Turn on the machine, grind and spray K2 chemical
simultaneously. Apply the chemical on the fl oor uniformly, and then spray K3 chemical. Rub to a
high gloss and enter the next area. If using the crystallization powder, you can mix the powder
with water and then spray this directly to the fl oor.
Pick up the powder thoroughly using wet/dry vacuum cleaner, and replace the grinding disc
with the next larger granularity. Use the above directions,and continue grinding until the result is
acceptable.
The fl oor MUST be cleaned thoroughly before beginning the crystallization process.
Caution, Make sure there is no sand on the floor. The grinding disc should be
installed uniformly. Be sure to grind slowly and evenly with enough water.You
must completely remove the powder from the last process before beginning next
process. Immediately clean the floor with the vacuum cleaner,replace the grinding
disc from coarsely granular to finely granular. You can’t skip steps. There is coarse
grind,half-finishing grind and finishing grind,During finishing grind, if you feel
resistance, you can reduce the quantity of
Iron bar
.
Crystallization process
Caution: It’s best if there is no wax application on the floor. The floor MUST be free
of water and dirt. The color of the pad is white (or colorless). Replace pad if dirty.