Ice Free Fallin Standart, Manual

Page: 7 / 36

7
SERVICE
Front Plastic Removal
Removal of the front plastic is necessary to gain
access to the sensor arrays, LEDs, and playfield
displays. Remove the six slotted screws as
shown in fig A.
Playfield Removal
There are three different plastic layers that make
up the playfield. The outer plastic has the decal.
The middle plastic contains the LED strips. The
inner plastic covers the entire playfield except
around the sensor area. To gain access to the
sensor array you only need to remove both the
outer plastic and the middle plastic. Be careful
when removing the middle plastic that you do not
break off any of the LED strips mounted to it. To
gain access to the playfield displays you will
need to remove all three layers.
Front Plastic
Outer and Middle Plastics
Inner Plastic
Screw Locations Key