Water Glass Filler Kit
IOD150, IOD200, IOD250
Installation Instructions
WARNING: Disconnect power to unit before proceeding with installation.
1. Prepare the unit as follows:
·
Remove the lower front panel
·
Locate faucet-mounting holes in the front panel. (Reference page 6 for hole locations)
2. Install faucet and tubing assembly as shown below.
3. Connect field water supply to ¼ male flare fitting on tubing assembly. Apply water pressure and
check all connections for leaks. Check faucet for proper operation.
Maximum water pressure is
125 psi
. Check that tubing assembly does not interfere with wiring or electrical connections.
4. Carefully reinstall panels on unit.
Page
5
