Final Check List
CD40030/CD40022
Page
10
1. Check that electrical power has been supplied.
2. Check that a drain, separate from the ice
machine, insulated and made of rigid tubing,
has been connected to the dispenser.
3. Check that the ice machine has been properly
installed per the ice machines installation
directions. This includes the machine support
included with the dispenser.
4. Check that the ice machine/dispenser
assembly is level front to back and left to right.
5. Check that the coin box access key, if used, is
available.
To Start:
1. Connect electrical power. The dispensing
system will cycle on for a few seconds.
2. Go thru ice machine start up procedures.
Let the ice machine make two harvests.
3. Push the ice chute in.
4. Dispense wheel turns.
5. Ice will be dispensed from ice chute.
6. Fill out the warranty registration form and place
it in the mail.
7. Give the operator any keys and the instructions
on the operation and maintenance of the
product.
Check that the operator knows who to call for
service, and has the product/service manuals for the
machines.
Electrical Sequence
Pushing the ice chute closes a contact to the
gear motor.
The gearmotor will have power and the dispenser will
continue to operate as long as the ice chute is pushed
in. This model also has an agitation cycle of 3
seconds every 6 hours. Since the ice chute is not
pushed in during agitation no ice is dispensed.
