D-50 Modem User’s Guide for Mac OS X Page 2 of 35
1. Installing and Uninstalling D-50 Software
To use D-50 modem with Mac special D-50 software should be installed on the
computer.
D-50 software runs on Intel-based Apple computers with Mac OS X 10.4 "Tiger" or
Mac OS X 10.5 "Leopard" operating systems.
Everything needed to install or uninstall D-50 software is contained in one
application file named
AddRemoveModem_vX-Y
(where vX-Y is version number
which may vary). This application is supplied with D-50 modem on the modem's
built-in installation CD or it can be downloaded from the Internet. You can copy
AddRemoveModem_vX-Y
to any folder on your hard disk or removable media
and run it from there.
AddRemoveModem_vX-Y
application's main window has two buttons: "Install
Modem" and "Uninstall Modem". Clicking these buttons will install or uninstall the
D-50 modem software, respectively.
With modem software uninstalled, D-50 functions only as installation CD and USB
flash disk with no modem function.
With modem software installed, D-50 functions only as a modem with no CD and
USB flash disk functions.
Note 1:
If
AddRemoveModem_vX-Y
application file is on D-50 installation CD,
please copy it to some other location before using it to install modem software. You
may need it to uninstall modem software in future. After you install modem
software, D-50 will function only as a modem and installation CD will become
invisible.
Note 2:
During installation and un-installation please keep the modem
disconnected from your computer.
