8
SERVICE
CAUTION
This game uses complex electronic components that are very sensitive to static electricity. Observe precau-
tions below before handling these electronics. Failure to do so may void the warranty and damage electronic
assemblies.
Before servicing electronics, turn off AC power to the game. Wait for capacitors to discharge.
DO NOT remove any of the components on the main board (e.g. compact flash and eproms) while the game is
powered on. This may cause permanent damage to the parts and the main board.
Before touching or handling electronic assemblies, discharge static electricity on your body. To discharge this
static, begin by connecting the line cord to a grounded outlet. Don’t turn on the game. Next, touch the safety
ground stud of the power supply chassis.
Store electronic assemblies in an anti-static area. Use anti-static bags to store or transport the game circuit boards.
Don’t remove or connect electronic assemblies when cabinet power is on. Otherwise, you’ll damage electronic as-
semblies and void the game’s warranty.
After you complete maintenance or service, replace ground wires, shields, safety covers and install and tighten
ground and mounting screw.
AC Service switch
This game using a AC cutoff switch located in the back. When servicing the game if you remove the
back cabinet panels with the power on, the deck pusher will stop. This is normal. If service is re-
quired with AC applied, pull the AC switch out which will allow power to the deck pushers. There
one for each cabinet side.
*** WARNING *** This ac cut off switch is for your safety as serious injury could result if disabled.
*** ATTENTION *** Cette ac couper commutateur est pour votre sécurité aussi grave peut en
résulter des blessures si handicapés.
Disable safety switch by
pulling out switch.
