STORAGE
1: change engine oil.
2: drain the fuel tank and carburetor into a petrol
container. Spray the inside of the fuel tank with
aerosol rest-inhibiting oil. Reinstall the fuel filling
cap.
CAUTION:
If storage will last more than half month,
carburetor draining is very important to assure
proper performance after storage.
WARNING!
Petrol is extremely flammable and is explosive
under certain condition. Refuel in a well-ventilated
area with the engine stopped. Do not smoke or allow
flames or sparks in the area where the engine is
refueled or where petrol is stored.
3: perform the following antirust procedures in
cylinder inside:
Remove the spark plug cover, fix it to near plastic
parts with rubberize fabric or cord, let it separated
from the spark plug.
Poor a tablespoon (15-20cc) of clean engine oil into
the cylinder, then cover the spark plug hole with a
cloth.
Operate the kick starter several times to distribute the
oil.
Reinstall the spark plug and spark plug cover.
4: discharge the storage cell and putting in the place
without freezing and direct sunlight. Charge it one
time per half year.
5: wash and dry the motorcycle. Wax all painted
surfaces.
6: lubricate the drive chain.
7: inflate the tires to their recommended pressure.
Place the motorcycle on blocks to raise both tires off
36
Summary of Contents for PST300-19
Page 8: ...Please write down the numbers here for reference Frame NO Engine NO PARTS LOCATION 6 ...
Page 9: ...7 ...
Page 10: ...8 ...
Page 41: ......
