Ice Bear PST150-19N, Manual

Page: 34 / 40

WARINING:
When the bulb is very hot in “ON” position, this
condition will last for a short time after the button
was turn off. So the bulb should be cooled down
before operating.
NOTE:
Turn the igniting on “OFF” position when
changing the bulb.
Check in again after finishing the bulb changing to
make sure the new bulb can work well.
FUSE:
There is a fuse box beside the storage cell. The entire
electrical appliance is protected by a fuse. Please
check the fuse first when your motorcycle is dead.
If the fuse has burned out, that may suggest the
electrical appliance is overloaded or short-circuit.
Please trust Zhenhua dealer for your repairing.
NOTE:
Turn the igniting button on “OFF” position before
changing or inspecting fuse.
WARNING!
Do not use other standard fuse, which may destroy
your engine and light.
TROUBLE-SHOOTING
If you can’t start your engine, please check in as the
follows steps
1) There is not enough fuel in the tank
2) Whether the fuel has flows into carburetor from
fuel system.
3) If the last step has been verified, please check the
igniting system.
32