10
Keys
Program mode
Normal operating mode
Index key
(To select Menus)
Shift Key
(To move between characters
& to select parameters)
Increment Key
(To increment the selected
digit & to select parameters)
Enter Key
(To store the modifications &
datas)
#
SCRL/HLD
MORE
SCRL/HLD
(To switch between Scroll/Hold
mode)
To increment Display
pages
To decrement Display
pages
More Key
(To view further sub pages)
4.1 Key Description :
4.2 Changing the configuration Items
In program mode, after selecting the configuration item through
Index key, It can be altered by using shift, Increment & Enter key.
The shift (
) key is used to select the digit one by one. The
selected digit is shown by flashing that digit.
The Increment (
) key is used to increment the selected
digit. The increment key Increments the digit from 0 to 9 and then wraps
down to zero once again. Shift and Increment keys are also used for
selecting the required parameter.
Once the required values are set in the configuration items
press the Enter
key to store it in memory. If the change is accepted
the display Indicates ‘E’ otherwise an error message is displayed as
‘Error’.
Once the configuration Items are programmed hold in the
&
keys together for 3 seconds to return back to normal operating
mode.
