INSTRUCTION MANUAL
CODE
80208 REV B Nov/2016
(It can be modi
fi
ed without notice) Page.: 12
J
.P. SELECTA s.a.u.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
Tel 00 34 937 700 877 Fax 00 34 937 70 23 62
e-mail: [email protected] - www.jpselecta.es
4 PACKING LIST
The standard equipment consists of the following components:
Bath 20L
80060 / 80080
Bath 45L.
80020 / 80021
And the following accessories:
Heater element protector
6000066 (for 20L)
Heater element protector
6000088 (for 45L)
Cover
14118 (x1 for 20L / x2 for 45L)
Instruction manual
80208
Be sure that the voltage supply is the same as the one indicated
on the characteristic plate of the equipment.
Do not use the equipment if it is NOT earthed.
If you have to change the plug keep in mind the following :
Blue cable: Neutral.
Brown cable: Phase.
Yellow/green cable: Earth.
5 INSTALLATION & ASSEMBLY
Place the bath on a
fl
at, horizontal and level surface. Use always the
bath with the heater element protector shelf.
6 FEATURES
CONTROL PANEL:
1 Main switch with indicator lamp.
2 Temperature mode indicator.
3 Time mode indicator.
4 Temperature/Time display
5 Starting up indicator lamp.
6 Waiting time indicator lamp.
7 Temperature selector push-button
8 Time selector push-button.
- Set of starting up time: Working period between 1’ and 9h 59’, or
up to 99.9h, once the set temperature has been reached.
- Set of waiting time: Period of time until the starting up, between 1
and 24 hours. Decimal fraction of an hour (1.5 = 1hour 30 minutes).
9 Parameter increase push-button.
10 Parameter decrease push-button.
11 Start/Stop push-button.
12 Safety thermostat indicator lamp.
REAR PART
13 Safety thermostat adjusting knob. (DO NOT MOVE IT, the screw
must always be fully tightened in the clockwise direction.)
14 Safety thermostat reset pushing button.
13
14
6
5
4
12
1
10
9
8
7
11
3
2
