ICC ANT-245GHZ, Installation Manual

Page: 7 / 17

ANT-245GHZ
Connecting this small 2.4GHz/5GHz antenna
is very simple since it connects directly to the
AP.
Attach the antenna by matching
it to the N-Type female
connector on the AP and turning
clockwise.
Make sure not to strip the
grooves by inserting the antenna
crooked and using too much
torque when completing the
installation. The antenna should
be hand tightened.
Connecting to an AP
Attach the antenna by matching
it to the N-Type female
connector on the AP and turning
clockwise.
Make sure not to strip the
grooves by inserting the antenna
crooked and using too much
torque when completing the
installation. The antenna should
be hand tightened.
Once completed, the installation
should be a device with external
antennas that are straight and secure.
NOTE
: These devices are already
water proof but for added protection
the user can cover with black rubber
backing linerless insulating electrical
tape (not vinyl or plastic tape). This
could be used to secure the connector
region (silver section) to completely
cover the N-Type Male and Female
connectors.
Once completed, the installation
should be a device with external
antennas that are straight and secure.
NOTE
: These devices are already
water proof but for added protection
the user can cover with black rubber
backing linerless insulating electrical
tape (not vinyl or plastic tape). This
could be used to secure the connector
region (silver section) to completely
cover the N-Type Male and Female
connectors.
7