System Settings
Select “System Settings” and press [Enter] button to enter the settings function. Here you can:
Change the language of the user interface
Set the time
Use the calendar
Set screen refresh mode (full or partial refresh)
Erase activation records
Select this to erase adobe activation record. Adobe DRM books will not be readable after
activation record is erased. You are required to activate the device via ADE again.
Set auto shutdown settings
Press [Up/Down] button to select auto shut down time: 3mins, 5mins, 10mins, 15mins, and
20mins. Select “Disable” to disable auto shut down and THE ICARUS GO will remain power on
all the time until it is manually power off by pressing the [Power] button.
Restore factory settings
View system information
Connecting to a computer
Use the supplied USB cable to plug into the ICARUS Reader Go, and connect the other end to
acomputer. A“USB Connected” window will pop out upon successful connection to computer.
Computer will detect both the built in memory and SD card on the reader as a removable disk.
Managing Files
You will be able to access built in memory and SD card (if SD card is plugged in) from “My
Computer” after the device is connected to a computer. You can move, copy or delete the
existing files or folders from computer. At this momentthe device is under key lock mode. The
reader will resume normal operation automatically after disconnecting from the computer.
4. Precautions and maintenance
The battery
• Charge the battery only in temperature that ranges from 0 to 35 degree Celsius.
• Do not charge the device if the battery is found damaged or leaking.