EN - 7
the installation wizard when running the installation wizard. If you exit the
install wizard without fully completing the setting procedures, you may not
watch any broadcasting normally. In this case, you can use the Installation
Menu to configure your receiver as you like.
2.4 Reset Default
1. Enter the installation menu
2. Press / button to select resest default,
and press the
OK
button to confirm
3. Using the / button to select yes , and
press the
OK
button to confirm, Select
OK
to
restore all setting to Factory Default. Select
CANCEL
to return to System.
4. Reset default menu of restore all setting to
Factory Default, please note you to restore a
time default all data to be able to delete, for
example: Channel, menu, installation and so
on.
2.5 Search shortcut way
a) The first press search channel shortcut into
the Language Interface, press / and
OK
button to select Language menu.(Figure 2.8
show )
b) The second press search channel shortcut
into the country Interface, press / and
OK
button to confirm search country.(Figure 2.4
show )
c) The third press search channel shortcut reset
t Interface, press
OK
/
CANCEL
button to into
automatic interface and search channel. The
back of the parade with the above-mentioned.
(Figure 2.6 show)
3. Basic Operation
This chapter describes functions such as switching channel, volume control, and
basic features for watching programs.
3.1 Switching Channel
• Pressing the / button may transform to
the neighboring channel on panel
• Using panel’s numeric keyboard to be
possible to cut directly to the channel which
likes (Figure 3.1 show)
Figure 2.7
Figure 2.8
Figure 3.1
Summary of Contents for Imatch DT200
Page 1: ...Imatch DT200 Operating instructions DVB T MODULE...
Page 2: ......
