iCarsoft English User’s Manual
EN
I
Disclaimer
To take full advantage of the unit, you should be familiar with the
•
engine.
All information, illustrations, and specifications contained in this
•
manual are based on the latest information available at the time
of publication. The right is reserved to make change at any time
without notice.
Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the iCarsoft
Serial products / CR Plus, please read this user’s manual first
carefully and observe the following safety precautions at a minimum
whenever working on a vehicle:
Always perform automotive testing in a safe environment.
•
Do not attempt to operate or observe the tool while driving
•
a vehicle. Operating or observing the tool will cause driver
distraction and could cause a fatal accident.
Wear safety eye protection that meets ANSI standards.
•
Keep clothing, hair, hands, tools, test equipment, etc. away from
•
all moving or hot engine parts.
Operate the vehicle in a well-ventilated work area: Exhaust gases
•
are poisonous.
Put blocks in front of the drive wheels and never leave the vehicle
•
unattended while running tests.
Use extreme caution when working around the ignition coil,
•
distributor cap, ignition wires and spark plugs. These components
create hazardous voltages when the engine is running.
Put the transmission in P (for A/T) or N (for M/T) and make sure
•
the parking brake is engaged.
Keep a fire extinguisher suitable for gasoline/chemical/ electrical
•
fires nearby.
Don’t connect or disconnect any test equipment while the ignition
•
is on or the engine is running.
Keep this tool dry, clean, free from oil/water or grease. Use a mild
•
detergent or a clean cloth to clean it if necessary.
