Heavy Duty & OBDII Diagnostic Tool HD V3.0
I
EN
Disclaimer
All information, illustrations, and specifications contained in this manual
are based on the latest information available at the time of publication. The
right is reserved to make change at any time without notice.
Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the HD V3.0,
please read this user
‟s manual first carefully and observe the following safety
precautions at a minimum whenever working on a vehicle:
Always perform automotive testing in a safe environment.
Do not attempt to operate of observe the tool while driving a vehicle.
Operating or observing the tool will cause driver distraction and could
cause a fatal accident.
Wear safety eye protection that meets ANSI standards.
Keep clothing, hair, hands, tools, test equipment, etc. away from all
moving or hot engine parts.
Operate the vehicle in a well-ventilated work area: Exhaust gases are
poisonous.
Put blocks in front of the drive wheels and never leave the vehicle
unattended while running tests.
Use extreme caution when working around the ignition coil, distributor
cab, ignition wires and spark plugs. These components create
hazardous voltages when the engine is running.
Put the transmission in P(for A/T) or N(for M/T) and make sure the
parking brake is engaged.
Keep a fire extinguisher suitable for gasoline/ chemical/ electrical fires
nearby.
Don
‟t connect or disconnect any test equipment while the ignition is on or
the engine is running.
Keep the HD V3.0 dry, clean, free from oil/ water or grease. Use a mild
detergent on a clean cloth to clean the outside of the HD V3.0, when
necessary.
