CR IMMO User Manual
36
and disabling the remote control key, etc. At this time, the transport mode
needs to be deactivated to restore the vehicle to normal.
7.24 AdBlue Reset (Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea
reset operation is required.
7.25 NOx Sensor Reset
NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in
engine exhaust. If the NOx fault is re-initialized and the NOx catalytic converter
is replaced, it is necessary to reset the catalytic converter learned value stored
in the engine ECU.
7.26 Stop/Start Reset
This function is used to open or close the automatic start-stop function via
setting the hidden function in ECU (provided that the vehicle has a hidden
function and supported by hardware).
8 Feedback
This function enables you to feedback the diagnostic issues to us for analysis and
troubleshooting.
Tap
Feedback
, and tap
OK
to enter into the vehicle diagnostic record page.
A. Feedback
Tap the target vehicle to enter the feedback page.
B. History
Tap it to view the diagnostic feedback logs which are marked with different color
indicating the process status of the diagnostic feedback.
C. Offline list
Tap it to enter the diagnostic feedback offline list page. Once the tool gets a stable
network signal, it will be uploaded to the remote server automatically.
9 Update
This module enables you to update the diagnostic software & App and
frequently used software.
9.1 Update Diagnostic Software & APP
Tap
Update
on the Job Menu to enter the update center.
