myDVR1630/930 Operational Guide
8. Remote Set Up of myDVR
******** Requires Configuring Network Settings in Section 3-7 *************
myDVR provides a remote web interface to access most set up parameters. Please
note that Schedule and Motion Zone set up parameters
are are not supported
via the
web interface.
To connect to the admin page over the web you can either click on
button on the
myNVR client program or connect to
http://ip-address:http-port/admin.htm
via Microsoft
Internet Explorer.
(Only IE Exploer is supported, we do not support other third party
browsers, i.e. FireFox.)
Before loading the admin page, the browser prompts for the USER ID and Password,
The default values are “root” and “dw2001,” respectively.
See Figures below showing Set Up pages for each category. After setting all the
parameters for each page.
Make sure to press the APPLY button at the bottom of the page for caching the
storage of the settings.
After completing all setup values, go to the “
Save Setup
” menu and press the
SAVE
button. The system will apply the settings and reboot.
To protect your DVR from unauthorized use, iCanTek strongly recommends
changing the User ID and Password.
Preliminary
47
Content subject to change without notice.
