User’s Guide
Page 25 of 34
4.10 LLDP Configuration
Picture 4.10.1 LLDP Configuration
Switches support LLDP(Link Layer Discovery Protocol), which can define switch
capacity,
management
address,
device
tags
and
port
tags
as
different(TLV(type/length/value) and save them in LLDPDU (Link Layer Discovery
Protocol Data Unit). These information will be released to the direct-connected neighbor
device, neighbor devices will save these information based on MIB(Management
Information Base) . These information will be used for network management system
examination or judge link communication condition.
LLDP information can be configured in above page, including transmission interval,hold
time Multiplier,retransmission delay and transmission delay.
Enable LLDP or Disable LLDP can be configured. Users can also configure the
information transmitted to neighbor devices, like port description, system name, system
description, system property and management address.
4.11 SNMP Configuration
4.11.1 SNMP system configuration
Picture 4.11.1 SNMP System Configuration
SNMP(Simple Network Management Protocol) is Internet-standard protocol for
managing devices on IP networks.It consists of a set of standards for network
