IC Realtime nvr700ns User Manual Download Page 114

Page: 114 / 131

106

Device color or brightness setup is not correct.

6. Can not search local records.

There are following possibilities:

HDD ribbon is damaged.

HDD is broken.

Upgraded program is not compatible.

The recorded file has been overwritten.

Record function has been disabled.

7. Video is distorted when searching local records.

There are following possibilities:

Video quality setup is too low.

Program read error, bit data is too small. There is mosaic in the full screen. Please

restart the device to solve this problem.

HDD data ribbon error.

HDD

malfunction.

Device hardware malfunctions.

8. There is no audio when monitor.

There are following possibilities:

It is not a power picker.

It is not a power acoustics.

Audio cable is damaged.

Device hardware malfunctions.

9. There is audio when monitor but there is no audio when system playback.

There are following possibilities:

Setup is not correct. Please enable audio function

Corresponding channel has no video input. Playback is not continuous when the screen

is blue.

10. Time display is not correct.

There are following possibilities:

Setup is not correct

Battery contact is not correct or voltage is too low.

Crystal is broken.

11. Device can not control PTZ.

There are following possibilities:

Front panel PTZ error

PTZ decoder setup, connection or installation is not correct.

Cable connection is not correct.

PTZ setup is not correct.

PTZ decoder and device protocol is not compatible.

Summary of Contents for nvr700ns




































































































































Search results

Summary of Contents for nvr700ns

Reviews:

Brands by name

Popular brands

IC Realtime nvr700ns, User Manual

Search results

Summary of Contents for nvr700ns

Reviews:

Brands by name

Popular brands