55
z
Function: There are various devices for you to select. Console is for serial port or min-end
platform to upgrade program. Keyboard is for you to use special keyboard to control current
device.
z
Baud rate: You can select proper baud rate.
z
Data bit: You can select proper data bit.
z
Stop bit: There are three values: 1/1.5/2.
z
Parity: there are three choices: none/odd/even.
System default setup is:
z
Function:
Console
z
Baud
rate:115200
z
Data
bit:8
z
Stop
bit:1
z
Parity:
None
After completing all the setups please click save button, system goes back to the previous menu.
Figure 5-8
5.3.5 Network
Here is for you to input network information. See
X364H364H364H
Figure 5-9
X
.
z
IP address: Here you can input IP address.
z
DHCP: It is to auto search IP. When enable DHCP function, you can not modify IP/Subnet
mask /Gateway. These values are from DHCP function. If you have not enabled DHCP
function, IP/Subnet mask/Gateway display as zero. You need to disable DHCP function to
view current IP information. Besides, when PPPoE is operating, you can not modify
IP/Subnet mask /Gateway.
z
TCP port: Default value is 37777.
z
UDP port: Default value is 37778.
z
HTTP port: Default value is 80.
z
Max connection: system support maximal 10 users. 0 means there is no connection limit.
z
Transfer mode: Here you can select the priority between fluency/video qualities.
z
Network download: System can process the downloaded data first if you enable this function.
After completing all the setups please click save button, system goes back to the previous menu.
