IC Realtime 1U POE NVR Series, User Manual, Page: 69 / 291

4.1.4.6.3 Record Control
After setting the schedule record or schedule snapshot, you will need to enable auto record and
snapshot function so that system can automatically record or snapshot.
● Auto: (Default setting for main stream) The system will automatically record video based
on the type and record period you set in the Schedule interface.
● Manual: The system records general footage constantly unless switched off.
● Off: The system will not record any footage for the specified channel.
You will need to have storage authorities to implement the Manual record operation. Make sure
the HDD has been properly installed.
Step 1
Right-click on the mouse and then select Manual Control > Record Mode or select
Main Menu > Advanced Settings > Storage Settings >Record Control. See Figure
4-43.
Figure 4-43
Step 2 Configure parameters.
Table 4-10
Parameter Description
Streams
Are the different sources from the cameras.
● Main Stream: High Resolution stream of the camera.
● Sub Stream 1: Low Resolution typically D1 Standard Definition.
● Sub Stream 2: Secondary substream can typically handle 720P
or 1080P dependent on the camera capabilities.
58