IC Realtime 1U POE NVR Series, User Manual, Page: 55 / 291

4.1.4.4 Adding Camera
After adding a remote camera, the NVR can receive, store, and manage the video streams of
the remote device. You can view, browse, playback, and manage several remote devices at the
same time.
IC Realtime cameras plugged into a recorder with a built-it POE have autoregistration. It will
automatically add the cameras to the recorder. If the camera hasn’t been activated previously it
will set the camera’s admin password to the same as the system’s admin password.
Step 1 If on the P2P interface of the Wizard, click Next . Otherwise, go to Main Menu >
Advanced Settings> Camera Configuration> Add/Remove Device.
The Add/ Remove Device interface will be displayed. See Figure 4-28
Figure 4-28
Step 2 Register remote device. IC Realtime cameras plugged into the built-in POE of a
recorder will automatically register to the system.
Search and then add
1. Click
Search .
The devices found are displayed at the upper pane. You may need to initialize
new cameras.
2. Double-click a remote device, or select a remote device and then click Add to
register it to the Added Device list. * This will add the camera using the NVR
credentials . See Figure 4-29.
3.
Set parameters. See Table 4-7.
44