manualshive.com logo in svg

IC Realtime 1U POE NVR Series, User Manual, Page: 231 / 291

Share
Download
IC Realtime 1U POE NVR Series User Manual Download Page 231

Table 4-73

Parameter

Description

Enable

Enable the alarm center function.

Protocol Type

In the

Protocol Type

list, select protocol type. The default is

Alarm

Center

.

Host IP

The IP address and communication port of the PC installed with
alarm client.

Port

Auto Report Plan

In the

Auto Report Plan

list, select time cycle and specific time for

uploading alarm.

Step 3

Click

Apply

to complete the settings.

4.12.6 Register

This function allows you to register the NVR into a specified proxy server which acts as the
transit to make it easier for the client software to access the NVR.
Step 1

Select

Main Menu

>

Advanced Settings

>

NETWORK

>

Register

.

The

Register

interface will be displayed. See Figure 4-233.

Figure 4-233

Step 2

Configure the settings for the register parameters. See Table 4-74.

220

Summary of Contents for 1U POE NVR Series




































































































































































































































































































Reviews:

No comments