manualshive.com logo in svg

IC Realtime 1U POE NVR Series, User Manual, Page: 197 / 291

Share
Download
IC Realtime 1U POE NVR Series User Manual Download Page 197

Figure 4-188

Step 2

To configure the settings for the scene change parameters, see "4.8.5.1 Motion
Detection".

Step 3

The scene change function does not have region and sensitivity options.

Step 4

Click Apply to complete the settings.

● Click

Default

to restore the default setting.

● Click

Copy to

, in the

Copy to

dialog box, select the additional channel(s) that you

want to copy the motion detection settings to, and then click

Apply

.

4.8.5.5 PIR Alarm

Supported IC Realtime cameras with PIR sensors can communicate with the NVR if the PIR
sensor was triggered. PIR sensors are typically more accurate than pixel based motion alarms.
Step 1

Select

Main Menu

>

Advanced Settings

>

Alert Center

>

Video Detection

>

PIR Alarm

.

The PIR Alarm interface will be displayed. See Figure 4-189.

186

Summary of Contents for 1U POE NVR Series




































































































































































































































































































Reviews:

No comments