manualshive.com logo in svg

IC Realtime 1U POE NVR Series, User Manual, Page: 196 / 291

Share
Download
IC Realtime 1U POE NVR Series User Manual Download Page 196

Figure 4-187

Step 2

To configure the settings for the video loss detection parameters, see "4.8.5.1 Motion
Detection".
The video loss function does not have region and sensitivity options.

Step 3

Click

Apply

to complete the settings.

● Click

Default

to restore the default setting.

● Click

Copy to

, in the

Copy to

dialog box, select the additional channel(s) that you

want to copy the motion detection settings to, and then click

Apply

.

4.8.5.4 Scene Change

This function is for static cameras. If the image scene had changed (for example, if the camera is moved or
disturbed the camera without permission), the NVR can generate an alarm event.
Step 1

Select

Main Menu

>

Advanced Settings

>

Alert Center

>

Video Detection

>

Scene Changing

.

The

Scene Changing

interface will be displayed. See Figure 4-188.

185

Summary of Contents for 1U POE NVR Series




































































































































































































































































































Reviews:

No comments