Table 4-55
Parameter
Description
Name
Enter a name for the region.
Sensitivity
Every region of every channel has an individual sensitivity value.
The greater the value is, the easier the event will be triggered.
Threshold
The threshold for motion detect. Every region of every channel will
have an individual threshold.
When any one of the four regions triggers a motion detect event, the channel where
this region belongs will trigger a motion detect event.
Step 4
Right-click on the screen to exit the region setting interface.
Step 5
On the
Motion Detection
interface, click
Apply
to complete the settings.
4.8.5.1.2 Setting Schedule
Motion Detect events will only occur within the defined time period.
Step 1
Next to
Schedule
, click
Setting
.
The Setting interface will be displayed. See Figure 4-184.
Figure 4-184
Step 2
Define the motion detection period. By default, it is active all the time.
● Define the period by drawing.
◇
Define for a specified day of a week: On the timeline, click the half-hour blocks to
select the active period.
◇
Define for several days of a week: Click
before each day, the icon will change
to
. On the timeline of any selected day, click the half-hour blocks to select the
active periods, all the days with the
icon will take the same settings.
182
Summary of Contents for 1U POE NVR Series
Page 1: ...User s Manual V4 1 1 ...
Page 106: ...Figure 4 92 Figure 4 93 Step 2 Configure parameters See Table 4 26 95 ...
Page 291: ...280 ...