Figure 4-175 Export progress
4.7.3.2.2 Importing Face Database
Step 1
Select
Main Menu > Advanced Settings > Alert Center
>
Database
>
Face Database Config
Step 2
Click
Import
.
Step 3
Set address and password.
● Password is required. This is the same password created when the database was
exported. Without a correct password, the import will not be saved..
● The address will change to /NVR/Facelib/ automatically if this directory is not
changed.
Step 4
Click
OK
to start importing the face database, and you can view the progress on
the importing interface.
4.7.3.3 Black/whitelist
The Blacklist/ White list database is used in conjunction with an ANPR camera. The NVR can
compare the detected plate information with the plate on the blacklist/whitelist and then trigger the
corresponding alarm linkage.
After creating and enabling the black/whitelist, the plate in the blacklist will be indicated on the
preview interface with a red outline on the plate list, while the plate in the whitelist will be
indicated as green on the plate list. For the plate not in the black/whitelist, the plate will be
indicated as white.
4.7.3.3.1 Adding B/W List
Step 1
Select
Main Menu > Advanced Settings > Alert Center
>
Database
>
Block/Allow List
.
The
Block/Allow List
interface will be displayed. See Figure 4-176.
171
Summary of Contents for 1U POE NVR Series
Page 1: ...User s Manual V4 1 1 ...
Page 106: ...Figure 4 92 Figure 4 93 Step 2 Configure parameters See Table 4 26 95 ...
Page 291: ...280 ...