IC Realtime 1U POE NVR Series, User Manual, Page: 167 / 291

Parameter Description
PTZ Activation
Select the check box and click Setting to select the channel and PTZ
action. When an event occurs, the NVR will have the selected
channel perform the corresponding PTZ action. For example,
activate the PTZ in channel one to turn to the preset point X.
● Tripwire events only supports PTZ preset point activation.
● Corresponding PTZ actions must be configured prior, see
"4.4.4 Calling PTZ Functions".
Delay
At the end of the event, the recording will extend for a period of
the specified time. The time range is from 10 seconds to 300
seconds.
Tour
Click to select the check box and then select the channel(s) for tour.
When the event is triggered, the local interface of the NVR device
will display the selected channel(s) on the screen.
● you will need to set the time interval and mode for tour first,
see "4.17.2 Tour".
● After the tour ends, the previous screen split mode will resume.
Log
Select the check box, the NVR device records the alarm
information in the log when an alarm event occurs.
Voice Prompts
Check the box and then select the corresponding audio file from the
dropdown list. The NVR plays the audio file when the alarm occurs.
Refer to "4.18.1 File Management" to add audio file first.
Buzzer Select the check box to activate the onboard buzzer when an event
occurs.
Step 4 Click Apply .
4.7.2.7.2 Queuing
If using an AI fisheye camera that supports the queuing function, A supported NVR can connect
the corresponding linkage actions once the people amount in the queue or the waiting time has
triggered an alarm. Select a region first to set the corresponding actions. For the same line, the
queue people number alarm and queue time alarm have the same linkage actions.
Step 1
Select Main Menu > Advanced Settings > Alert Center > Parameters > People Counting >
Queuing .
Step 2 The Queuing interface will be displayed. See Figure 4-161.
156