4.4.4 Calling PTZ Functions
After you have configured the PTZ settings, you can call the PTZ functions from the Expanded
PTZ Control Panel. See Figure 4-100.
Figure 4-100
4.4.4.1 Calling Presets
Step 1
On the expanded PTZ control panel, in the
No.
box, enter the value of the preset that
you want to call.
Step 2
Click
to call the preset.
Step 3
Click
again to stop calling the preset.
4.4.4.2 Calling Tours
Step 1
On the expanded PTZ control panel, in the
No.
box, enter the value of the tour that
you want to call.
Step 2
Click
to call the tour.
Step 3
Click
again to stop the tour.
4.4.4.3 Calling Patterns
Step 1
On the expanded PTZ control panel, in the
No.
box, enter the value of the pattern
that you want to call.
Step 2
Call
to call the pattern.
Step 3
The PTZ camera moves according to the configured pattern repeatedly.
Step 4
Click
again to stop performing the pattern.
4.4.4.4 Calling AutoScan
Step 1
On the expanded PTZ control panel, in the
No.
box, enter the value of the border that
you want to call.
Step 2
Click
.
Step 3
The PTZ camera will perform scanning according to the configured borders.
Step 4
Click
again to stop auto scanning.
101
Summary of Contents for 1U POE NVR Series
Page 1: ...User s Manual V4 1 1 ...
Page 106: ...Figure 4 92 Figure 4 93 Step 2 Configure parameters See Table 4 26 95 ...
Page 291: ...280 ...