prel
imin
ary
prel
imin
ary
iC-PV EVAL PV1M1
EVALUATION KIT DESCRIPTION
Rev A6, Page 4/9
BiSS ADAPTER CABLE
Figure 8: BiSS adapter cable
Figure 9: Typical BiSS slave to master connection
Figure 10: 10-pole connector (to board)
Figure 11: BiSS 9-pole Sub-D connector (to PC-USB
adapter)
Connector to Board
(10-pole ribbon)
Pin Name Function
1
n.c.
(not connected)
2
GND
Ground
3
MA +
Clock Input
4
SLO + Slave Data Output
5
MA -
Clock Input, inverted
6
SLO -
Slave Data Output, inverted
7
VDD
+5 V Sensor Supply
8
SLI +
Opt. Data In
9
SLI -
Opt. Data In, inverted
10
NCS
1
Opt. Not Chip Select (SPI)
BiSS Connector to PC-USB Adapter
(9-pole Sub-D)
Pin Slave Master Function
1
n.c.
(VB)
(12 V Sensor Supply Output)
2
MA +
MA +
Clock Line
3
MA -
MA -
Clock Line, inverted
4
VDD
VDD
+5 V Sensor Supply Output
5
SLI -
MO -
Master Data Output, inverted
to Slave Data Input, inverted
6
GND
GND
Ground
7
SLO + SL +
Data Line
8
SLO -
SL -
Data Line, inverted
9
SLI +
MO +
Master Data Output
to Slave Data Input
1
iC-MHM offers SPI interface mode. The
Not Chip Select
(NCS) of the SPI interface can be connected to J2-10
by closing JP2 (see Figure 15).
