Meter Operation
Turn
on
power switch, and the meter will light on
.
Press on the left side of the meter button to choose power output mode.There are 4 gears to
shift, as follow:
"0"
gear
-
0% assist
Fitness mode
:
motor power output 0%, suitable for sporting and exercising.
“1" gear - 25% assist
Aerobic mode : motor power output 25%, lower consumption, longer range, suitable for aerobic ride
exercising .
“2" gear - 50% assist
ECO mode : motor power output 50%, moderate consumption, suitable for outdoor leisure or riding on flat road.
“3”gear - 90% assist
Climbing mode : motor power output 90%, suitable for slope climbing or fast trip.
Press on the right side meter button to choose ‘meter display’, as follow
:
, single trip riding mileage (km)
, total riding mileage (km), once press the right side meter button
, single trip riding time(h), twice press the right side meter button
Long press the right side meter button for 2 seconds, can display plug-in battery capacity(applicable for
bike with plug-in battery pack).
Assemble Steps
(front wheel part)
1: Open the package, fix the front wheel with attached tools (as picture shows)
Step 1:
Take out the front wheel from
package
Step 3:
Insert the axis from the right side,
for each side of the bottom bracket , there
is a small spring, and the spring circle
towards inside.
Step 5:
Fasten the right bar and lock the
front fork.
Step 2:
Place the brake pad on the brake
slot
①
②
Step 6:
Rotate the front wheel, if there is
no friction, it is fixing. Or trim the screw on
the brake until there is no friction.
Step 4:
Tighten the bottom bracket screw
of the left side front fork, should not screw
too tightly.
make it unworkable
Kindly notice: Please shut off the battery when the bike is unused.
Please charge the bike every 60 days if you do not use it, in case destroy the battery and
Beyond fashion, better know you!
05
06
ALFA
Serie
