Initial Setup
This quick run through will show you how quick and easy it is to set
up and use your Infinity Pen for the first time in 5 easy steps.
Locate the 5 small notches on the rear of the pen and give these a firm
push up. This will open the battery compartment cover. Insert one
AAA battery and remove the USB Bluetooth Dongle.
1
Insert the USB dongle into your IWB / device.
2
Open Hive software, and click the wheel in the bottom left.
Open settings.
3
In the lower left section, scroll down and make sure the option of
“support hardware pen” is checked. Once checked, click “OK”.
4
Test if your pen is working by selecting the “Pen” tool and drawing
on the canvas. The numbered button will also be assigned to a
default tool.
See the next page for more information.
5
