IBT Technologies MB966 User Manual Download Page 40

Page: 40 / 68

BIOS SETUP

MB966 User’s Manual

BIOS SETUP UTILITY

Main

Advanced

PCIPnP

Boot

Security

Chipset

Exit

IDE Configuration

<- Select Screen

↑↓

Select Item

+- Change Field
Tab

Select Field

F1 General Help
F10 Save and Exit
ESC Exit

Mirrored IDER Configuration

[Disabled]

Configure SATA#1 as

[IDE]

SATA#1 IDE Configuration

[Compatible]

SATA#2 IDE Configuration

[Enhanced]

►

Primary IDE Master

: [Hard Disk]

►

Primary Slave Master

: [Not Detected]

►

Secondary IDE Master

: [Not Detected]

►

Secondary IDE Slave

: [Not Detected]

►

Third IDE Master

: [Not Detected]

►

Fourth IDE Master

: [Not Detected]

Hark Disk Write Protect
IDE Detect Time Out (Sec)
ATA(PI) 80Pin Cable Detection

{Disabled}
[35]
[Host & Device]

The IDE Configuration menu is used to change and/or set the
configuration of the IDE devices installed in the system.

Hard Disk Write Protect

Disable/Enable device write protection. This will be effective only if
device is accessed through BIOS.

IDE Detect Time Out (Sec)

Select the time out value for detecting ATA/ATAPI device(s).

ATA(PI) 80pin Cable Detection

Select the mechanism for detecting 80pin ATA(PI) cable.

Summary of Contents for MB966





































































Search results

Summary of Contents for MB966

Reviews:

IBT Technologies MB966, User Manual, Page: 40 / 68

Search results

Summary of Contents for MB966

Reviews: