IBT Technologies IB828, User Manual, Page: 35 / 50

BIOS SETUP
IB828 User’s Manual 31
Power Management Setup
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI Function
Enabled ITEM HELP
ACPI Suspend
S1 Menu Level >
C2 Disable/Enable
Disabled
Power Management Option
User Define
HDD Power Down
Disabled
Video Off Option
Suspend

Off
Video Off Method
V/H SYNC+ Blank
Soft-Off by PWR-BTN
Instant-Off
PowerON by PCI Card
Disabled
ACPI XSDT Table
Enabled
HPET Support Enabled
RTC Alarm Resume Disabled
Date (of Month) 0
Resume Time Alarm (hh:mm:ss) 0 : 0 : 0
ACPI Suspend Type
The default setting of the ACPI Suspend mode is S1(POS) .
C2 Disable/Enable
The default setting of this field is Disabled .
Power Management Option
This field allows you to select the type of power saving management
modes. There are four selections for Power Management.
Min. Power Saving Minimum power management
Max. Power Saving Maximum power management.
User Define Each of the ranges is from 1 min. to 1hr.
Except for HDD Power Down which
ranges from 1 min. to 15 min.
HDD Power Down
When enabled, and after the set time of system inactivity, the hard disk
drive will be powered down while all other devices remain active.
Video Off Option
This field sets the video off option. By default, video goes into suspend
state and then Off.
Video Off Method
This field defines the Video Off features. There are three options.