IBT Technologies IB530, User Manual

Page: 33 / 56

BIOS SETUP
IB530 User’s Manual 29
Integrated Peripherals
This section sets configurations for your hard disk and other integrated
peripherals. The first screen shows three main items for user to select.
Once an item selected, a submenu appears. Details follow.
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
ITEM HELP
Master Drive PIO Mode
Auto Menu Level >
Slave Drive PIO Mode
Auto
IDE Primary Master UDMA
Disabled
IDE Primary Slave UDMA
Disabled
IDE DMA transfer access
Enabled
IT888 ISA Decode IO
[Press Enter]
IT888 ISA Decode Memory
[Press Enter]
IT888 DMA
[Press Enter]
IDE HDD Block Mode
Enabled
Onboard LAN Boot ROM
Disabled
Onboard FDC Controller
Disabled
Onboard Serial Port 1
3F8/IRQ4
Onboard Serial Port 2
2F8/IRQ3
UART Mode Select
Normal
Onboard Parallel Port
387/IRQ7
Parallel Port Mode
SPP
EPP Mode Select
ECP Mode Use DMA
**** 2
nd
SuperIO Device ****
Onboard Serial Port 3
Serial Port Ise IRQ
Onboard Serial Port 4
Serial Port Ise IRQ
EPP1.7
3
3E8h
IRQ11
Disabled
IRQ10
IDE Primary/Secondary Master/Slave PIO
These fields allow your system hard disk controller to work faster.
Rather than have the BIOS issue a series of commands that transfer to or
from the disk drive, PIO (Programmed Input/Output) allows the BIOS to
communicate with the controller and CPU directly.
The system supports five modes, numbered from 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select
the best available mode.
IDE Primary/Secondary Master/Slave UDMA
These fields allow your system to improve disk I/O throughput to
33Mb/sec with the Ultra DMA/33 feature. The options are
Auto and
Disabled .
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive.