5
Enable: means do not change any codec of the network stream. For protocol-converting;
Video decode & audio decode: this may change codec of the network stream, input is to do
transcoding.
This Encoder does not support “B-frame encode” network stream in.
There’re tricks to help you get more better video quality:
1.
For example, If your source is 1920x1080_60_hz in, please encode to 60fps or 30fps out; If
your source is 50hz in, please set “Encode” to 50fps or 25fps out. And ect.
2.
Some media content like Sport channel which is moving very fast, please try Dual P encode.
Like this:
And if your using is monitoring and source comes from Camera, and do recording, you can try
Smart P.
Stream:
Output configure
It supports http, hls, rtsp, rtmp/rtmps, udp unicast/multicast, srt, ndi | hx2.
