Last update:
2022-06-13
www.ibspe.com
User Manual |
P4
3
ECL202 and ECL202e
The ECL202e is identical to the ECL202 except that the ECL202e resolution is never better than
0.2 μm. For this
reason, the ECL202e does not require an export license.
This manual will only refer to the ECL202, but all instructions apply to the ECL202e except where noted.
3.1
Description
The Lion Precision ECL202 Eddy-Current Displacement Sensor provides high resolution, noncontact
measurement of position changes of a conductive target. The system consists of driver electronics and a probe
calibrated for a specific material and range. The calibration information is detailed on a calibration certificate
which is shipped with the system.
The ECL202 provides a linear analog voltage proportional to changes in the target position and a digital switched
(setpoint) output with a user programmed switching setpoint.
4
Quick start instructions
1.
Connect the probe to the ECL202
Note: The ECL202 is calibrated to a specific probe identified by serial number. The probe serial number must match
the “USE PROBE S/N” label on the front of the ECL202.
2.
Connect the output to a monitoring device.
3.
Connect then apply power.
4.
Adjust the probe position so the Range Indicator shows green.
